Payment & Shipping Terms:
Yellow Galvanized Steel 3/8” Sleeve Anchors with Hex Flange Nut
|Size||As customer's requires|
|After-sale service||If there are any quality problems, please contact with us at once|
Hex flange nut sleeve anchors feature an expandable sleeve over a threaded bolt, with serrated flange nut. Filler sleeves help eliminate galling between sleeves and tapered bolt heads. Use in concrete, hollow or shallow masonry, or grout-filled blocks.
1- Using a hammer drill and carbide tipped drill bit, drill a hole the same diameter as the anchor diameter, and at least 1/2" to 1” deeper than the expected embedment.
2- Clean out the hole of all debris.
3- Set the nut flush with the top of the sleeve anchor.
4- Insert the sleeve anchor through the fixture into the hole in the base material until the washer and nut is tight against the fixture.
5- Turn the nut until finger tight.
6- Use a wrench to set the anchor by turning the nut three to four full turns.
If you are interested in Sleeve Anchors, Please do not hesitate to email us or call us. Our professional team will assit you to purchased the quality products.